Cross LV Overlay

Enhance your car’s appearance with our **LV Cross Decal Overlay**, featuring a stylish cross design surrounded by a repeating LV-style pattern. Perfect for those who want to add a touch of luxury and personality to their vehicle. This decal is made from high-quality vinyl, ensuring durability and a smooth finish on any surface. It's easy to apply, weather-resistant, and ideal for both interior and exterior use.

Installation Instructions:
1. **Prepare the Surface**: Clean the surface where the decal will be applied with soap and water or an alcohol-based cleaner. Ensure the area is completely dry and free of dirt, dust, or grease.
   
2. **Position the Decal**: Before removing the backing, position the decal in the desired spot. Use masking tape to temporarily hold it in place, ensuring it's straight and centered.

3. **Peel the Backing**: Carefully peel off the backing layer from the decal, exposing the adhesive side. Avoid touching the adhesive directly to prevent fingerprints or dirt from sticking.

4. **Apply the Decal**: Starting from one edge, slowly and carefully apply the decal to the surface, pressing down as you go. Use a squeegee or a credit card wrapped in a cloth to smooth out air bubbles as you work your way across.

5. **Remove the Transfer Tape**: Once the decal is fully applied, slowly peel away the transfer tape at a sharp angle, leaving the decal securely adhered to the surface.

6. **Final Inspection**: Smooth out any remaining air bubbles by gently pressing with the squeegee or credit card. If needed, use a pin to pop stubborn bubbles, then smooth them out.

Your LV Cross Decal Overlay is now installed! For best results, avoid washing the area for at least 24 hours to allow the adhesive to fully cure.